FILLMED® LIGHT PEEL® (pH3) 100ml + Brush (Authorised FILLMED Reseller)

FILLMED® LIGHT PEEL® (pH3) 100ml + Brush

FILLMED® LIGHT PEEL® is a professional superficial chemical peel specifically developed to improve fine lines, dullness and loss of skin radiance while offering a high level of tolerance suitable for sensitive skin.

Formulated with a 20% peeling complex combining Gluconolactone and Mandelic Acid, LIGHT PEEL® provides controlled superficial exfoliation to help remove dead and dehydrated surface cells, improve skin texture and reveal a fresher, smoother and more radiant-looking complexion.

FILLMED describes LIGHT PEEL® as a superficial chemical peel that can be incorporated before aesthetic treatments to improve overall skin quality without stripping the skin of water.

The formulation combines the gentle keratolytic properties of Gluconolactone, a Polyhydroxy Acid (PHA), with Mandelic Acid, an Alpha Hydroxy Acid (AHA) recognised for its exfoliating activity and good skin tolerance.

This combination makes LIGHT PEEL® particularly suitable for patients presenting with fine lines, dull-looking skin, reduced radiance or sensitive skin where a gentle superficial peeling approach is desired.

FILLMED's technical practitioner documentation specifies LIGHT PEEL® at approximately pH 3.5, while the current FILLMED UK commercial product listing refers to Light Peel (pH3).

LIGHT PEEL® forms part of FILLMED's professional chemical peel collection alongside BRIGHT PEEL® and TIME PEEL®, allowing practitioners to select the most appropriate peeling formulation according to individual skin concerns and treatment objectives.

Pack Contents

Each professional presentation contains:

• 1 × 100ml bottle of FILLMED® LIGHT PEEL®
• 20% peeling complex
• Gluconolactone
• Mandelic Acid
• Technical pH approximately 3.5
• Dosing tube
• Application brush
• Professional-use packaging

The 100ml professional presentation is designed to provide sufficient solution for multiple professional chemical peel procedures when used according to FILLMED's treatment protocol.

Always check the individual product packaging and FILLMED's current professional instructions before treatment.

Product Composition

20% Peeling Complex

FILLMED® LIGHT PEEL® contains a 20% peeling complex combining:

• Gluconolactone
• Mandelic Acid

These two acids provide complementary superficial exfoliating activity while maintaining the high level of skin tolerance for which LIGHT PEEL® is designed.

Gluconolactone

Gluconolactone is a Polyhydroxy Acid (PHA) used throughout FILLMED's professional chemical peel range.

It provides keratolytic activity that helps loosen the bonds between surface skin cells, encouraging removal of dead and dehydrated cells and supporting a smoother, fresher-looking complexion.

Properties associated with Gluconolactone include:

• Keratolytic activity
• Gentle exfoliation
• High skin tolerance
• Antioxidant properties
• Hygroscopic properties supporting hydration
• Support for the stratum corneum barrier
• Suitability for sensitive skin
• Complementary action alongside other hydroxy acids

Its molecular characteristics allow effective superficial exfoliation while generally providing greater tolerance than more aggressive conventional peeling acids.

Mandelic Acid

Mandelic Acid is an Alpha Hydroxy Acid (AHA) incorporated into LIGHT PEEL® specifically to support treatment of fine lines and dull-looking skin.

FILLMED identifies Mandelic Acid as:

• A keratolytic agent
• Well tolerated by the skin
• Suitable for targeting fine lines
• Suitable for targeting dullness

Combined with Gluconolactone, Mandelic Acid contributes to controlled exfoliation of the superficial skin layers while helping improve skin texture and radiance.

Superficial Peeling Technology

LIGHT PEEL® works by lowering the skin's pH and providing controlled keratolytic activity within the superficial layers of the skin.

FILLMED describes this action as helping loosen the bonds between surface skin cells, allowing accumulated dead and dehydrated cells to shed and reveal a fresher-looking complexion beneath.

The 20% Gluconolactone and Mandelic Acid peeling complex has been formulated to balance:

• Effective superficial exfoliation
• High skin tolerance
• Improved radiance
• Fine-line refinement
• Skin texture improvement
• Preservation of skin hydration

Unlike stronger resurfacing treatments, LIGHT PEEL® is designed as a superficial and well-tolerated chemical peel.

This makes it particularly appropriate for patients requiring skin-quality improvement who may not need, or may not be suitable for, a stronger professional peeling formulation.

Key Benefits

• Professional FILLMED® superficial chemical peel
• Contains a 20% peeling complex
• Combines Gluconolactone and Mandelic Acid
• Technical pH approximately 3.5
• Supplied in a 100ml professional bottle
• Targets fine lines
• Helps improve dull-looking skin
• Enhances skin radiance
• Provides controlled superficial exfoliation
• Helps remove dead and dehydrated surface skin cells
• Supports smoother-looking skin texture
• Helps freshen the complexion
• Designed to maintain skin hydration
• Offers a high level of skin tolerance
• Suitable for sensitive skin where professionally assessed
• Can be incorporated before aesthetic treatments where appropriate
• Forms part of the FILLMED® professional chemical peel collection
• Designed to work alongside PRE PEEL and POST PEEL
• Intended for appropriately trained professional use

Clinical Results

FILLMED has clinically evaluated LIGHT PEEL® for improvements in skin quality and signs of superficial ageing.

Within FILLMED's practitioner documentation, clinical evaluation demonstrated:

• 7.3% improvement in skin radiance
• 9% reduction in crow's feet wrinkles
• Very high tolerance
• Identified as ideal for sensitive skin

FILLMED's current UK commercial product information also reports clinical improvements in fine lines and radiance.

Clinical-study results represent outcomes observed within the relevant evaluated study populations and should not be interpreted as guaranteed individual treatment results.

Individual outcomes will vary according to skin condition, age, treatment protocol, lifestyle and individual biological response.

Common Treatment Concerns

FILLMED® LIGHT PEEL® is specifically designed for professional treatment programmes addressing concerns including:

• Fine lines
• Dull-looking skin
• Loss of radiance
• Uneven skin texture
• Tired-looking complexion
• Accumulation of dead surface skin cells
• Early visible signs of skin ageing
• Sensitive skin requiring a well-tolerated superficial peel

Treatment selection should always be based upon the patient's skin type, skin condition, medical history, treatment objectives and professional assessment.

For concerns primarily relating to pigmentation, dark spots or uneven complexion, FILLMED® BRIGHT PEEL® may provide a more appropriate professional protocol.

For more established wrinkles and loss of firmness requiring a stronger peeling approach, FILLMED® TIME PEEL® may be considered where professionally appropriate.

Professional 3-Step Peel Protocol

FILLMED incorporates LIGHT PEEL® into a structured three-stage professional chemical peeling procedure.

Step 1 – Prepare

The patient's skin is prepared using FILLMED® PRE PEEL.

Sensitive areas, including the eyes and lips, should be appropriately protected before application.

PRE PEEL is applied over the treatment area using an appropriate cotton pad or compress.

It helps cleanse the skin and balance its pH to approximately pH 4, preparing the treatment area for application of LIGHT PEEL®.

Step 2 – Peel

Approximately 2.5–3ml of LIGHT PEEL® is measured into the supplied dosing tube.

The solution is then applied evenly over the treatment area using the supplied application brush.

According to FILLMED's professional protocol:

• Begin with approximately 3 minutes during the first session
• Treatment time may be progressively increased according to skin tolerance
• The patient's skin should be continuously monitored while the peel remains in contact with the skin

The practitioner should always follow FILLMED's current professional protocol when determining the appropriate treatment duration.

Step 3 – Neutralise

Following the appropriate contact time, FILLMED® POST PEEL is applied using a cotton pad or compress.

POST PEEL has a pH of approximately 8 and contains:

• Sodium Bicarbonate to neutralise the action of the acids
• Dextran Sulfate to help soothe the treated skin

Application may be repeated where required according to FILLMED's professional protocol.

The skin should then be:

• Appropriately rinsed with water
• Gently patted dry
• Treated with suitable post-procedure skincare

FILLMED recommends B3-RECOVERY CREAM following the procedure as a soothing post-treatment skincare product.

Recommended Treatment Protocol

FILLMED's professional chemical peel protocol recommends a treatment course consisting of:

• 4 treatment sessions
• 2 weeks between each session
• Approximately 15 minutes for the complete professional protocol

Each treatment follows the structured sequence:

• Prepare with PRE PEEL
• Apply LIGHT PEEL®
• Monitor the patient's skin response
• Neutralise with POST PEEL
• Rinse appropriately
• Gently pat the skin dry
• Apply suitable post-procedure skincare

The exact treatment duration and number of sessions should always be adapted according to the patient's skin condition, tolerance, individual response and professional assessment.

Results & Treatment Outcomes

LIGHT PEEL® is designed to provide progressive improvement in skin quality throughout an appropriately selected professional treatment course.

Potential treatment outcomes may include:

• Brighter-looking skin
• Improved skin radiance
• Fresher-looking complexion
• Smoother skin texture
• Reduced appearance of fine lines
• Improved appearance of crow's feet
• Removal of dull and dehydrated surface cells
• Improved overall skin quality
• More even-looking complexion
• Refreshed and rejuvenated appearance

Because LIGHT PEEL® is a superficial peel, treatment focuses primarily on skin quality, radiance and fine-line improvement rather than aggressive resurfacing.

Individual treatment outcomes will vary according to skin condition, age, lifestyle, adherence to the recommended treatment course and individual biological response.

LIGHT PEEL® vs BRIGHT PEEL® vs TIME PEEL®

The FILLMED® professional chemical peel collection allows practitioners to select a formulation according to the patient's primary skin concern.

LIGHT PEEL® – A gentler superficial peel designed for fine lines, dullness, reduced radiance and sensitive skin.

BRIGHT PEEL® – Designed for pigmentation concerns, dark spots, uneven complexion and improved radiance.

TIME PEEL® – The ageing-focused peel designed for wrinkles, visible signs of ageing and loss of firmness.

Appropriate product selection should always follow professional skin assessment and FILLMED's current treatment guidance.

Storage & Handling

FILLMED® LIGHT PEEL® should be stored and handled according to the manufacturer's current recommendations.

For appropriate professional handling:

• Keep within the original packaging
• Keep the bottle securely closed when not in use
• Protect from inappropriate heat and environmental exposure
• Maintain appropriate professional hygiene when dispensing
• Avoid contamination of the solution
• Use the supplied dosing equipment appropriately
• Do not use after the stated expiry date
• Do not use if product integrity appears compromised

Always refer to the current product packaging and FILLMED professional guidance for specific storage requirements.

Important Information

FILLMED® LIGHT PEEL® is a professional chemical peeling solution and should only be used by appropriately trained practitioners with suitable knowledge and competence in chemical peel procedures.

Practitioners should possess professional knowledge of skin anatomy and physiology, professional chemical peeling, patient selection, skin assessment, acid application, treatment timing, neutralisation, post-procedure care and the recognition and management of adverse skin reactions.

Before treatment, practitioners should undertake:

• Comprehensive patient consultation
• Review of medical history
• Assessment of skin type and condition
• Assessment of treatment suitability
• Review of previous chemical peel procedures
• Review of current skincare products and active ingredients
• Assessment of contraindications
• Discussion of realistic treatment expectations
• Explanation of expected skin responses
• Explanation of potential adverse reactions
• Appropriate informed consent

Sensitive areas, including the eyes and lips, should be appropriately protected before application.

The patient's skin should be carefully monitored throughout the peeling stage.

Following the appropriate treatment time, LIGHT PEEL® should be neutralised using FILLMED® POST PEEL according to the manufacturer's professional protocol.

Patients should be provided with appropriate post-procedure skincare and aftercare instructions, including suitable sun protection.

Practitioners should always consult FILLMED's current professional chemical peel protocol for complete indications, contraindications, precautions, application times, neutralisation instructions and treatment guidance.

Do not use if the product has passed its expiry date, packaging integrity has been compromised, product appearance is abnormal, product integrity is in doubt or product authenticity cannot be verified.

For professional use only.

SEO Title

FILLMED® LIGHT PEEL® 100ml | Professional Chemical Peel UK

SEO Description

Shop FILLMED® LIGHT PEEL® 100ml, a professional 20% Gluconolactone and Mandelic Acid superficial peel for fine lines, dullness, radiance and sensitive skin.

SEO Keywords

FILLMED LIGHT PEEL, FILLMED LIGHT PEEL UK, LIGHT PEEL 100ml, FILLMED chemical peel, FILLMED chemical peels UK, professional chemical peel, superficial chemical peel, gentle chemical peel, sensitive skin chemical peel, chemical peel for sensitive skin, fine line chemical peel, dull skin peel, radiance peel, skin brightening peel, Mandelic Acid peel, professional Mandelic Acid peel, Gluconolactone peel, PHA chemical peel, AHA chemical peel, 20 percent chemical peel, professional skin peel, skin resurfacing peel, skin renewal peel, FILLMED PRE PEEL, FILLMED POST PEEL, FILLMED professional skincare, professional aesthetics products UK, aesthetic supplies UK, FILLMED authorised reseller, Belle Ame Direct

Product Tags

FILLMED, LIGHT PEEL, FILLMED LIGHT PEEL, Chemical Peels, Professional Chemical Peel, Superficial Peel, Gentle Peel, Sensitive Skin, Fine Lines, Dull Skin, Skin Radiance, Mandelic Acid, Gluconolactone, AHA, PHA, Skin Renewal, Professional Skincare, Professional Aesthetics, Professional Use Only