{"id":12762,"date":"2026-07-26T14:29:11","date_gmt":"2026-07-26T14:29:11","guid":{"rendered":"https:\/\/facesconsent.com\/blog\/?p=12762"},"modified":"2026-07-26T14:30:58","modified_gmt":"2026-07-26T14:30:58","slug":"ten-dermal-fillers-worth-knowing-properly","status":"publish","type":"post","link":"https:\/\/facesconsent.com\/blog\/ten-dermal-fillers-worth-knowing-properly\/","title":{"rendered":"Ten Dermal Fillers Worth Knowing Properly"},"content":{"rendered":"\n

Most clinic<\/mark><\/a> fridges now hold products<\/mark><\/a> from four or five different manufacturers, bought at different times, often on price. The practical problem is not stock. It is that a practitioner<\/mark><\/a> asked why they reached for one syringe over another can rarely give an answer that goes beyond habit or cost per millilitre. That gap shows up in results, and it shows up in complication rates.<\/p>\n\n\n\n

What follows works through ten ranges available to UK practitioners, grouped by the job each is built to do rather than by brand loyalty.<\/p>\n\n\n\n

\"Gloved<\/figure>\n\n\n\n

Rheology Decides More Than Brand in Dermal Filler Treatment<\/h2>\n\n\n\n

Three measurements determine where a gel belongs, and every manufacturer publishes them somewhere in the technical file even when the marketing copy does not.<\/p>\n\n\n\n

G prime (elastic modulus) describes resistance to deformation. High G prime gels hold their shape against muscular and gravitational load, which is why they belong on bone in the mid-face, chin and jaw. Low G prime gels deform readily, which is what makes them appropriate for mobile tissue such as lips and superficial lines.<\/p>\n\n\n\n

Cohesivity describes how strongly the gel holds together. Poorly cohesive product spreads beyond the intended pocket. Highly cohesive product stays where it was placed, which matters enormously in the tear trough and along the jawline.<\/p>\n\n\n\n

Phase angle describes the balance between elastic and viscous behaviour. A low phase angle gel behaves more like a solid, migrating less over time.<\/p>\n\n\n\n

Any dermal filler<\/mark><\/a> treatment plan should start from those three properties and the tissue plane they suit, then work backwards to which syringe on the shelf fits. Selecting on price first, then finding a use for what arrived, is how practitioners end up placing a Sub-Q product in a lip. The Faces guide to top CE approved dermal filler brands<\/mark><\/a> covers the certification side of that selection in more depth.<\/p>\n\n\n\n

Sculptra: Reconstitution, Dilution and Realistic Timelines<\/h2>\n\n\n\n

Sculptra<\/mark><\/a> is not a filler in the volumising sense. Each vial contains 150 mg of poly-L-lactic acid microparticles alongside sodium carboxymethylcellulose and mannitol. The particles provoke a controlled subclinical inflammatory response; fibroblasts lay down type I collagen around them over roughly three to six months as the PLLA degrades. Volume seen on day one is diluent, and it disappears within 48 hours.<\/p>\n\n\n\n

Reconstitution is where most problems originate. The Galderma instructions for use<\/mark><\/a> specify 5 to 8 ml of sterile water for injection, with an optional further 1 ml of 2% lidocaine<\/mark><\/a> added immediately before treatment. Higher dilution volumes have been repeatedly associated with lower nodule rates, and published body and d\u00e9colletage protocols use considerably more, with 16 ml documented for d\u00e9colletage work. Reconstituted product can be held for up to 72 hours at 2 to 8\u00b0C.<\/p>\n\n\n\n

Placement is deep dermal, subcutaneous or supraperiosteal, never intradermal. Enter at 30 to 40 degrees with the skin held taut, and feel for the change in resistance as the needle crosses from dermis into subcutis. Superficial placement is the single most common cause of visible papules. Aspirate, inject on withdrawal, and massage the area thoroughly at the end of the session.<\/p>\n\n\n\n

A full Sculptra treatment course is typically three sessions at intervals of at least three weeks, and many injectors prefer four to six weeks. Duration is commonly quoted at around two years. Practitioners should photograph consistently, because meaningful Sculptra before and after comparison requires matched lighting and angle at baseline, at three months and at six months. The change is too gradual to assess from memory.<\/p>\n\n\n\n

Contraindications include active infection at the site, keloid tendency and known hypersensitivity to any component. It is a poor choice for anyone unwilling to accept a delayed result.<\/p>\n\n\n\n

Lumifil KISS and Cytosial Lip Filler for Perioral Work<\/h2>\n\n\n\n

Lip work punishes the wrong rheology faster than any other area.<\/p>\n\n\n\n

Lumifil KISS<\/mark><\/a> is a high-viscosity, high-density hyaluronic acid gel with lidocaine, marketed on a low phase angle and a particle weight around 2,500,000 daltons, properties that keep it close to the injection site. Listed duration varies between 9 and 15 months across different pack listings, which is a useful reminder to work from the instructions for use in the box rather than the product page. The wider Lumifil range<\/mark><\/a> extends beyond lips into cheeks, chin and jawline. Practitioners assessing Lumifil filler for the first time should start with a conservative 0.5 ml on a single client rather than committing to a bundle. <\/p>\n\n\n\n

Cytosial lip filler<\/mark><\/a> work generally uses the softer end of that range, while the deeper variants are indicated for nasolabial folds, marionette lines and cutaneous depressions placed into the deep dermis, with duration around nine months. Practitioners weighing Cytosial filler vs Juvederm<\/mark><\/a> should compare like with like, meaning a specific Cytosial variant against a specific Juvederm variant, matched on G prime and indication. Comparing a range against a range produces no useful answer. <\/p>\n\n\n\n

Technique matters more than product here. Retrograde linear threading in the submucosa, aspiration before each deposit, and awareness that the superior and inferior labial arteries most often run within the submucosal plane. The Faces overview of dermal filler injection techniques<\/mark><\/a> sets out the threading, fanning and bolus approaches in detail.<\/p>\n\n\n\n

Zhoabex Soft Touch and Zhoabex Deep for Full-Face Layering<\/h2>\n\n\n\n

Zhoabex<\/mark><\/a> Soft Touch is formulated with hyaluronic acid at three molecular weights, which allows it to act across several dermal levels at once, and it is manufactured with low residual BDDE. It is positioned for biorevitalisation and tissue support rather than structural correction, used either as a refining pass after volumising work or as a preparatory substrate before deeper product.<\/p>\n\n\n\n

Zhoabex Deep covers the volumising role in the same range. Layering the two follows a straightforward principle: structural product first onto bone or in deep subcutis, allow the tissue to settle, then refine superficially. Attempting both in one pass makes it impossible to judge how much correction the deep layer has already achieved.<\/p>\n\n\n\n

Practitioners new to Zhoabex filler should request the technical data sheet and confirm certification status before ordering.<\/p>\n\n\n\n

Ouye Filler and Kairax for Everyday Facial Correction<\/h2>\n\n\n\n

The Ouye filler<\/mark><\/a> range covers fine, deep and Sub-Q Plus grades, following the familiar three-tier structure. The fine grade suits superficial lines and delicate areas, the deep grade suits nasolabial folds and moderate volumising, and the Sub-Q Plus grade is intended for supraperiosteal placement in the mid-face and jaw. For Ouye lip filler work the fine or deep grade is appropriate; the Sub-Q Plus grade is not. <\/p>\n\n\n\n

Kairax follows the same logic across Kairax Fine, Kairax Deep and Kairax Sub-Q, is CE marked, and contains lidocaine. Kairax Deep occupies the middle of the viscoelastic range and is indicated for glabellar lines, nasolabial folds, marionette lines and nose and forehead contouring, placed into deep dermis or subcutaneous tissue. Practitioners can <\/mark>buy Kairax Deep dermal fille<\/mark>r<\/a> <\/mark>through Faces pharmacy.<\/p>\n\n\n\n

A word on research. Searching Ouye filler reviews returns mostly retail listings and social posts, which is true of most newer ranges. Retail star ratings measure delivery and price satisfaction, not clinical performance. Certification documentation, the instructions for use, and a small trial batch on consenting clients are the only reliable evidence a practitioner has.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Maxy Fill Body Filler and Dene B Body Filler for Large-Volume Work<\/strong><\/h2>\n\n\n\n

Body contouring changes the risk calculation entirely, because volumes are large and the anatomy is less forgiving of assumption.<\/p>\n\n\n\n

Maxy Fill Body Filler<\/mark><\/a> is supplied as a 70 cc cross-linked hyaluronic acid preparation manufactured by Quiver Medic and intended for professional use only. The facial variants in the Maxy Fill range cover contouring and finer work, with duration quoted at six to ten months depending on area, skin type and metabolism. As with Ouye, searching Maxy Fill body filler reviews surfaces retail commentary rather than clinical data. <\/p>\n\n\n\n

Dene B filler<\/mark><\/a> covers both facial and body applications. Dene B Classic H is the firmer grade in the range, selected for deeper wrinkle correction and structural contouring, with Dene B Classic S covering softer indications. Dene B Body Filler targets larger-volume work in the buttocks and hips and calves.<\/p>\n\n\n\n

Large-volume body filler carries a materially different risk profile from facial work. Infection risk rises with volume, migration is harder to control, and reversal requires substantially more hyaluronidase than most clinics hold. The Department of Health and Social Care has proposed placing body augmentation using fillers in the highest-risk red category under the forthcoming licensing scheme. Practitioners offering it should ensure their indemnity explicitly covers it.<\/p>\n\n\n\n

Genius Dermal Filler: Range Structure and Lip Selection<\/h2>\n\n\n\n

The Genius dermal filler<\/mark><\/a> range runs across four variants, Genius Enrich, Genius Smooth, Genius Ultra and Genius Define, and is positioned primarily for lip and perioral work rather than structural mid-face correction.<\/p>\n\n\n\n

That four-tier structure is worth understanding before ordering, because the variants are not interchangeable and the names give no reliable indication of rheology on their own. Selection should follow the same logic applied to any lip product: softer, lower G prime gel in the vermilion body where movement is constant, firmer gel reserved for vermilion border definition and philtral column work where a crisper edge is wanted. Practitioners should confirm the G prime, cohesivity and HA concentration of each variant from the instructions for use in the box before deciding which does which job, rather than inferring it from the variant name.<\/p>\n\n\n\n

Practical checks apply here as they do to every range on this list: confirm CE or UKCA certification and the notified body number, confirm the supplier is a UK-registered pharmacy or authorised distributor, check batch numbers and expiry on arrival against the invoice, and retain the documentation. <\/p>\n\n\n\n

Regulation is tightening around exactly this. The MHRA has stated its intention to bring products marketed for aesthetic purposes within the scope of the UK Medical Device Regulations 2002. The House of Commons Library briefing on non-surgical cosmetic procedure regulation<\/mark><\/a> sets out the licensing scheme developed under Section 180 of the Health and Care Act 2022, with the government response to consultation published in August 2025 and a risk-tiered model placing facial fillers in the amber category.<\/p>\n\n\n\n

Where to Buy These Dermal Filler Ranges in the UK<\/h2>\n\n\n\n

Stock across all ranges is available through Faces<\/mark><\/a>, ordered from registered UK pharmacies with prescriber connection<\/mark><\/a> and next day delivery on in-stock lines. The catalogue extends well beyond filler, covering skin boosters<\/mark><\/a> and polynucleotides, fat dissolving injections<\/mark><\/a> and professional skincare<\/mark><\/a>, so a clinic restocking several categories can consolidate into one order and one audit trail.<\/p>\n\n\n\n

FAQs<\/h2>\n\n\n
\n
\n
\n

How long do lip fillers last?<\/strong><\/p>\n

\n\n

Lip filler typically lasts six to twelve months, which is shorter than most other facial areas. The lip is highly vascular and in near-constant motion, so hyaluronic acid is metabolised faster there than on bone. Denser products hold longer, with Lumifil KISS quoted between nine and fifteen months depending on the pack listing, though volume and placement depth influence this as much as the product does.<\/p>\n\n<\/div>\n<\/div>\n

\n

What are dermal fillers?<\/strong><\/p>\n

\n\n

Dermal fillers are injectable gels placed beneath the skin to restore volume, soften lines and refine contour. Most are cross-linked hyaluronic acid, which is reversible with hyaluronidase. A smaller group works by stimulating collagen instead of adding volume directly, including poly-L-lactic acid products such as Sculptra and calcium hydroxylapatite products, and these are not reversible.<\/p>\n\n<\/div>\n<\/div>\n

\n

How long do dermal fillers last?<\/strong><\/p>\n

\n\n

Between six and eighteen months for most hyaluronic acid products, depending on the gel, the area and the individual. Higher G prime products placed supraperiosteally in low-movement areas last longest. Softer gels in mobile tissue break down fastest. Collagen stimulators behave differently again, with results from a full Sculptra course commonly quoted at around two years.<\/p>\n\n<\/div>\n<\/div>\n

\n

How long do cheek fillers last?<\/strong><\/p>\n

\n\n

Cheek filler generally lasts twelve to eighteen months, longer than lips. Product placed supraperiosteally on the zygomatic arch and maxilla sits in a low-movement plane, and the high G prime gels used for structural mid-face work are more resistant to degradation than the softer gels used superficially.<\/p>\n\n<\/div>\n<\/div>\n

\n

Do lip fillers hurt?<\/strong><\/p>\n

\n\n

Most clients describe it as uncomfortable rather than painful, and it is well managed with anaesthesia. Topical anaesthetic applied for twenty to thirty minutes covers routine treatment, and most lip products including Lumifil KISS and the Kairax range contain lidocaine. A dental block gives near-complete anaesthesia for anxious clients or extensive work, though the resulting distortion makes live assessment harder.<\/p>\n\n<\/div>\n<\/div>\n

\n

How much are lip fillers?<\/strong><\/p>\n

\n\n

UK pricing typically runs from \u00a3150 to \u00a3350 for a 1 ml treatment, with wide regional variation and London at the upper end. Practitioners setting prices should work from cost per syringe, chair time, consumables, indemnity and the cost of holding adequate hyaluronidase stock, rather than matching a competitor’s advertised figure.<\/p>\n\n<\/div>\n<\/div>\n

\n

How much are dermal fillers?<\/p>\n

\n\n

Typically \u00a3150 to \u00a3450 per millilitre in the UK, varying by area, product and practitioner qualification. Structural mid-face and jawline work sits higher because it uses denser, more expensive product in larger volumes. Body filler is priced separately again, given the pack sizes involved.<\/p>\n\n<\/div>\n<\/div>\n

\n

What not to do after lip fillers?<\/strong><\/p>\n

\n\n

For the first twenty-four to forty-eight hours, clients should avoid strenuous exercise, alcohol, heat exposure including saunas and hot yoga, and pressure on the lips. Makeup should be kept off the area for twelve hours to reduce infection risk. Clients should be given written aftercare rather than verbal instruction, and told specifically which symptoms warrant an urgent call.<\/p>\n\n<\/div>\n<\/div>\n

\n

Are dermal fillers safe?<\/strong><\/p>\n

\n\n

Serious complications are uncommon but real, and the most significant is vascular occlusion, which can cause tissue necrosis and, rarely, blindness. There is no zero-risk area of the face. Safety depends far more on practitioner training, anatomical knowledge, product provenance and complication preparedness than on the brand of filler used.<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

Most clinic fridges now hold products from four or five different manufacturers, bought at different times, often on price. The practical problem is not stock. It is that a practitioner asked why they reached for one syringe over another can rarely give an answer that goes beyond habit or cost per millilitre. That gap shows […]<\/p>\n","protected":false},"author":6,"featured_media":12766,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"om_disable_all_campaigns":false,"footnotes":""},"categories":[20],"tags":[12,9,10,14,227],"class_list":["post-12762","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-aesthetics","tag-aesthetics","tag-dermal-fillers","tag-medical-practitioners","tag-treatment","tag-uk"],"_links":{"self":[{"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/posts\/12762","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/comments?post=12762"}],"version-history":[{"count":3,"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/posts\/12762\/revisions"}],"predecessor-version":[{"id":12768,"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/posts\/12762\/revisions\/12768"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/media\/12766"}],"wp:attachment":[{"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/media?parent=12762"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/categories?post=12762"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/facesconsent.com\/blog\/wp-json\/wp\/v2\/tags?post=12762"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}